|
|||
EM1000ul | Lamp Compatibility | Features | Specifications | Options and Accessories | Ordering Information | PDF
|
|||
250 TO 1000 WATT SHORT-ARC LAMP POWER SUPPLY
| The Ultimate Short-Arc LPS |
Safety Agency Compliance
The EM1000ul is designed to comply with most world safety
agency standards. For additional safety, we feature a unique interlock system which
addresses numerous safety concerns.
Reliability and Quality Standards
The EM1000ul is designed to perform under extreme conditions. Each
power supply is burned in at an elevated temperature and line voltage for 24 hours, and is
put through an exhaustive quality inspection before being released for shipment. This
reliability is backed with our two-year warranty.
Utmost in Flexibility
The EM1000ul offers the utmost in flexibility, and is easy to
operate. Start the lamp automatically when power to the supply is applied, or manually
after the preignition voltage is at maximum. The state of the art single-pulse ignitor can
be an integral part of the power supply, or detached and connected by special cable that
eliminates power drop. Control either the lamp power or current from the front panel, or
remotely by computer.
Options and Accessories
Inquire about the many options and accessories, such as embedded
microprocessor controller and serial communication using RS232 to monitor conditions and
control all power supply functions. With an optical feedback, light intensity can be
maintained through the life of the lamp
Easy to Operate
To operate the EM1000ul simply plug in the detachable IEC
320 C-19 power chord to standard ac lines. Plug the lamp fan to the outlet provided and
high voltage cables to the appropriate lamp terminals. Set the front panel lamp switch to
manual if you are starting the power supply for the first time. Press in the power switch.
Power switch color will change red (standby) to green (power on).
Push WATTS or AMPS switch to select the mode of operation. With the thumb wheel
switch set the operating power (250 to 999 Watts)or current (5.0 to 50.0 Amps). The
display on the right will display preignition voltage of about 130 Volts. Press the start
switch, the lamp will start and green lamp on indicator will light.
The display on the left will show actual lamp power if the WATTS switch is lit. Press AMPS
switch, it will light and display above will now show actual lamp current. The display on
the right displays lamp voltage at all times.
EM1000ul is made to be controlled remotely via our Parallel Interface using windows type
software on your PC extending features to include lamp life timer, lamp temperature
monitoring and other user specified functions.With a device such as our optional Optical
Intensity Controller light intensity and fluctuations can be minimized as described in the
Options and Accessories page.
Our Capabilities
With over three decades of experience in the design and manufacture
of instrumentation for analytical chemistry, spectroscopy and spectrophotometry, we
understand the requirements necessary to make our products truly research grade. Each unit
delivers dependable, high performance allowing you to focus on your results.
If this product isn't quite what you need ask our application engineers
for a solution by filling out an Application Request or by
calling EMSC directly at 1-203-924-1665. Small modifications to our standard products or
custom designs to your specifications are welcome. We provide solutions to your special
light requirements.
TOP
EM1000ul | Lamp Compatibility | Features | Specifications | Options and Accessories | Ordering
Information | PDF
EMSC, LLC
235 Canal Street, Suite 100
Shelton, CT, 06484, USA
Telephone: 1-203-924-1665
Fax: 1-203-924-1676
Send Email with questions or comments to questions@emsc-llc.com
Copyright © 1998 - 2002 EMSC, LLC. All rights
reserved.
Last modified: March 26, 2007
EM1000ul